ScanGauge II Car Mount DIY Files

$3.99

Have a 3-D printer and a ScanGauge II? This assembly gives you two options to fit your car with this electronic display that shows your car’s live data while driving. Want to have it shipped to you instead?

1) Secure an adhesive patch or a Velcro strip to wherever you want to mount it in your car

2) Use the included counterbored and predrilled holes to secure the assy with 2 wood screws.

The assembly independently articulates in the forward-backward and left-right directions via the two ball joints and uses friction to resist vibration-induced movement. Has held up remarkably well for the 5,000+ miles I have tested it.

Have a 3-D printer and a ScanGauge II? This assembly gives you two options to fit your car with this electronic display that shows your car’s live data while driving. Want to have it shipped to you instead?

1) Secure an adhesive patch or a Velcro strip to wherever you want to mount it in your car

2) Use the included counterbored and predrilled holes to secure the assy with 2 wood screws.

The assembly independently articulates in the forward-backward and left-right directions via the two ball joints and uses friction to resist vibration-induced movement. Has held up remarkably well for the 5,000+ miles I have tested it.

  • Make sure to print it with a UV resistant material such as ABS.

    For printing settings, I recommend you use:

    • 0.2 mm LH;

    • 5 walls;

    • Supports on the ball (support burrs are actually a plus);

    • And gyroid infill set at 30%.

  • Hardware to be used in the mount includes:

    • (4) Wood screw, ~ 3/8” in length and ~ 1/8” in diameter

    • Two more wood screws for the counterbore mounting option

    — OR —

    • Adhesive patch / Velcro strip

  • Comes with .sldprt, .step, and .stl file types for the below:

    • Double ball joint

    • Base (lower cup)

    • Cup (upper cup)

    • Holster